Installed with corrosion-resistant fasteners and proper edge sealing, fiber cement holds up to hail, pests, and rot better than most alternatives.
Our saws use vacuum shrouds to control silica dust, a real jobsite hazard when cutting fiber cement dry.
Crews are certified on HardieZone requirements and manufacturer-approved fastening patterns, not general siding methods.
Certification gets renewed on a regular cycle, and we can show proof of current standing on request.
Fiber cement is heavier and requires precise handling — our crews are trained specifically for this material.
We carry the liability coverage appropriate for heavier-material installation work.
Cracked or impact-damaged fiber cement panels get prioritized quickly, especially after hail events.
New installation estimates are typically scheduled within the same week.
Fiber cement costs more upfront than vinyl, and your estimate reflects material and labor separately so the trade-off is clear.
Repairs are priced by scope, not bundled into a bigger sales pitch.
Fiber cement's durability depends heavily on correct cutting, fastening, and edge sealing during install.
Corrosion-resistant fasteners are used throughout, since standard fasteners can react poorly with cement-based material. Fastener heads get set flush, not overdriven, which is a common mistake that cracks the panel around the nail.
Cracked or impact-damaged panels get replaced individually, color-matched when the product line is still available. Caulking at the seam uses a paintable, flexible formulation rated for the material's slight seasonal movement.
Unsealed cut edges are the most common cause of early trim failure on fiber cement jobs. Any cut edge gets a coat of touch-up primer before caulking, which the factory edge already has but a field cut doesn't.
We prep and prime correctly before repainting so the new color coat actually holds. We test moisture content in the panel before painting, since trapped moisture under fresh paint causes peeling within a year.
After hail or storm events, we inspect for hairline cracking that isn't always visible from the ground. We note impact direction and pattern, which helps distinguish hail from a single fallen-branch strike for claim purposes.
Flashing details around windows and doors get upgraded to current best practice where needed. Older galvanized fasteners sometimes corrode faster than the fiber cement around them — we swap to stainless or coated fasteners on repairs.
Call +1-844-782-0929 and describe your project — new installation, repair, or a color refresh.
For repairs, we bring common colors and profiles when available.
You get a written price covering material, certified labor, and a realistic timeline.
Installation or repair follows HardieZone fastening spec exactly, with edge sealing at every cut.
Install looks sharp and the crew clearly knew what they were doing with a heavier material — no chipped edges anywhere.
Repair crew color-matched a cracked panel so well we can't find it now.
Trim work around every window is sealed properly, no gaps like our old siding had.
Fiber cement held up through a bad hail season better than our neighbor's vinyl did.
Call now for a free estimate on fiber cement installation, repair, or a color refresh.
Call +1-844-782-0929Certified crews are dispatched locally — call to confirm coverage at your address.
